15MAINTENANCE
For deeper cleaning of the dustbin,
twist the Dustbin Cover Assembly
and pull up to release from the
dustbin. Gently dislodge any debris.
Lift the Filter Housing Release to
gain access to the HEPA and foam
lters. Remove the HEPA and foam
lter, tap to dislodge ne dust and
then rinse under cold water as
needed for a deeper clean Allow to
FULLY dry (24hrs recommended)
before re-assembling.
4
5
Replace the Dustbin Cover
Assembly and twist clockwise to
secure to the dustbin.
6
CAUTION: Never operate your vacuum cleaner without the filter in place.
Doing so may damage the motor and void the warranty.
To Next Page
Loading...
