This document is a user manual for the BLACK+DECKER BHSMP2008 and BHSMP2314 steam mops.
Function Description
The BLACK+DECKER BHSMP2008 and BHSMP2314 steam mops are designed for cleaning sealed hardwood, sealed laminate, linoleum, vinyl, ceramic tile, stone, and marble floors. These appliances are intended for indoor household use only. The device uses hot steam to clean surfaces, offering a chemical-free cleaning solution. It features a main unit with a water tank, a flexible hose, and various attachments for different cleaning tasks, including floor cleaning, garment steaming, and wallpaper stripping. The steam mop operates by heating water to produce steam, which is then directed through the attachments to clean and sanitize surfaces.
Important Technical Specifications
- Model Numbers: BHSMP2008, BHSMP2314
- Voltage: 230 V (AC)
- Power: BHSMP2008: 2000 W, BHSMP2314: 2300 W
- Water Tank Capacity: 1200 ml
- Weight: BHSMP2008: 5.9 kg, BHSMP2314: 6.1 kg
- Steam Ready Time: Approximately 180 seconds when first filled or after running dry.
- Water Type: Clean tap water is recommended. De-ionised water is recommended in hard water areas. No additives or chemicals should be used.
- Extension Cable: A 3-core cable is required as the appliance is earthed (Class 1 construction). An approved extension cable suitable for the power input of the appliance (up to 30m of 1.50mm² extension cable) can be used without loss of product performance.
Usage Features
The steam mop offers a versatile cleaning experience with several features:
- On/Off Switch (1): Controls the power to the unit.
- Indicator Lights:
- White (1c): Power on indicator, illuminates when the boiler is heating up.
- Green (1b): Steam ready light, illuminates when the boiler is up to temperature.
- Red (1a): Water empty warning light, illuminates when the water tank is empty.
- Steam Handle (11) with Trigger (11b) and Lock-off Slider (11a): The handle allows for comfortable operation and includes a trigger to activate steam flow and a lock-off slider to prevent accidental steam release.
- Variable Steam Flow Settings: The unit has variable steam flow settings (Min/Low, Mid, Max/High) that can be adjusted by rotating a dial on the steam handle, suitable for different surfaces and cleaning needs.
- Water Tank (3): Removable for easy refilling. It has a cap (3a) for filling.
- Accessories:
- Floorhead (6): Used for cleaning floors, attaches to extension poles.
- Extension Poles (5a, 5b): Extend the reach of the steam mop for floor cleaning.
- Flexible Hose (17): Connects the main unit to the steam handle for handheld use.
- Cleaning Pads (14): Attach to the floorhead with velcro for floor cleaning.
- Hand Nozzle (9): Used for garment steaming and with other small brush accessories.
- Hand Nozzle Sock (13): Used with the hand nozzle for garment steaming.
- Steam Concentrator (8): Directs a concentrated jet of steam.
- Round Brush (15) and Copper Brush (16): Attach to the steam concentrator for scrubbing.
- L-shaped Nozzle (10): Attaches to the steam concentrator.
- Squeegee (12): Attaches to the hand nozzle for cleaning windows/garments.
- Wallpaper Stripper Plate (7): (Only supplied with BHSMP2314) Used for wallpaper removal.
- Accessory Storage (4): Small accessories and the floorhead can be stored on the rear of the main unit.
- Safety Features: Pressure relief valve (21) to release excess pressure.
Usage Instructions:
- Assembly:
- Attach extension pole B (5b) to the floorhead (6).
- Attach extension pole A (5a) to extension pole B (5b).
- Attach the steam handle (11) to extension pole A (5a).
- For handheld use, connect the flexible hose (17) to the main unit and the steam handle (11).
- Attaching a Cleaning Pad (14): Place the pad on the floor with the velcro side up and press the floorhead onto it.
- Filling the Water Tank (3): Slide the water tank up and away from the main unit, lift the cap (3a), fill with clean tap water (or de-ionised water in hard water areas), and close the cap firmly. Do not overfill.
- Switching On: Press the ON/Off switch (1). The white light (1c) illuminates. Wait for the green light (1b) to illuminate, indicating the boiler is up to temperature.
- Steam Generation: Slide the lock-off slider (11a) on the steam handle to the unlocked position, then press the trigger (11b) to create steam.
- Cleaning:
- Floor Cleaning: Tilt the floorhead to a 45° angle and move slowly over the surface.
- Garment Steaming: Attach the hand nozzle (9) with the hand nozzle sock (13) to the steam handle.
- Wallpaper Stripping: Attach the wallpaper stripper plate (7) to the steam handle. Test on a small area first.
- Switching Off: Press the ON/Off switch (1). Slide the lock-off slider (11a) back to the locked position.
Maintenance Features
- General Cleaning: Wipe the appliance with a soft, damp cloth. For stubborn marks, use a mild solution of soap and water.
- Cleaning Pad Care: Remove and wash the cleaning pad (14) after use, following the wash care instructions on the pad.
- Water Tank Emptying: Always empty the water tank (3) after use.
- Cooling Down: Allow the appliance and all accessories to cool down before cleaning, performing maintenance, or removing accessories. Residual steam is under pressure in the hose after switching off, so allow time to cool before pressing the trigger.
- Pressure Relief Valve (21): If steam escapes from the pressure relief valve, switch off, disconnect from mains, allow to cool for one hour, then unscrew the valve. Check the seal and screw back on tightly. If steam persists, contact an authorized repair centre.
- Seal Inspection: Regularly inspect the seals between connection points (e.g., steam handle to extension poles, steam handle to accessories). If a seal malfunctions or is damaged, contact an authorized repair agent and do not use the appliance.
- Cord Inspection: Regularly check the power lead for damage. If damaged, it must be replaced by the manufacturer or an authorized BLACK+DECKER Service Centre.
- Storage: Store the appliance in a dry place, out of reach of children.
Safety Instructions:
- Read all safety warnings and instructions to avoid electric shock, fire, or serious injury.
- Do not direct steam at people, animals, electrical appliances, or outlets.
- Do not use on unsealed wood or laminate floors, leather, wax-polished furniture/floors, synthetic fabrics, velvet, or other delicate, steam-sensitive materials. Test on an isolated area first.
- Never put descaling, aromatic, alcoholic, or detergent products into the steam cleaner.
- Always wear suitable shoes when using or changing accessories. Do not wear slippers or open-toed footwear.
- The appliance emits very hot steam; the steam head, cleaning pads, and attachments get very hot during use. Do not touch hot parts.
- Do not leave the appliance unattended while connected to the supply mains.
- Unplug the appliance from the socket-outlet before cleaning or maintaining.
- If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service agent.
- Keep the appliance and its cord out of reach of children less than 8 years of age when energized or cooling down.
- Do not open the pressure relief valve or filling aperture during use.
- This product must be earthed. Ensure the power supply matches the voltage on the rating plate.
- Check for damaged or defective parts before use.
- Do not use if the appliance has been dropped, shows visible signs of damage, or is leaking.
- Take regular breaks during prolonged use.
Need help?
General
To Next Page