To Next PageTo Next PageWhat to do if Black & Decker BXPW1600PE Pressure Washer pump pressure drops suddenly during use?
If the Black & Decker Pressure Washer pump pressure suddenly drops during use, it might be because the water is being sucked from an external tank. Try connecting the appliance to the mains water supply. Also, the inlet water could be too hot, so reduce the temperature. Check if the nozzle or inlet filter is clogged and clean them.
How to fix Black & Decker Pressure Washer not sucking detergent?
If there's no detergent being sucked into your Black & Decker Pressure Washer, ensure the adjustable nozzle isn't on a high-pressure setting; set it to the " " setting. The detergent might be too dense, so try diluting it with water. If you're using a high-pressure hose extension, fit the original hose.
Why Black & Decker Pressure Washer motor buzzes but fails to start?
If your Black & Decker Pressure Washer motor buzzes but won't start, the power supply voltage may be too low. Check that the mains power supply line voltage matches what's on the appliance's plate. Also, voltage drop could occur due to the use of an extension cable; examine the characteristics of the extension cable.
Why Black & Decker BXPW1600PE Pressure Washer motor fails to start?
If your Black & Decker Pressure Washer motor fails to start, first, check that the plug is firmly in the socket and that the mains voltage supply is present. If the appliance hasn't been used for a while, use the tool to unjam the motor through the hole at the rear of the appliance (in models with this feature).
Why water escapes from thermo- stat valve of Black & Decker BXPW1600PE?
If water escapes from the thermo-stat valve of your Black & Decker Pressure Washer, it means the water temperature inside the pump head has exceeded the maximum rated value stated on the nameplate. When the appliance is in operation, avoid stopping the water jet for more than 5 minutes at a time.
Why is my Black & Decker BXPW1600PE so noisy?
If your Black & Decker Pressure Washer is excessively noisy, the water may be too hot. Try reducing the water temperature.
What to do if my Black & Decker Pressure Washer has no water delivery when gun trigger is depressed?
If there's no water delivery when the gun trigger is depressed on your Black & Decker Pressure Washer (with the supply hose connected), the nozzle might be clogged. Try cleaning the nozzle.
General| Quantity per pack | 1 pc(s) |
|---|
General guidelines for safe operation and handling of the appliance.
Details safety signs and symbols used in the manual and on the appliance.
Lists critical warnings and prohibitions for safe operation.
Overview of the manual, delivery, and packaging details.
Details on envisaged use, operator, and main components.
Step-by-step guide for assembling and connecting the appliance.
Instructions for adjusting spray nozzle, detergent, and working pressure.
Details on controls, start-up, stopping, and recommended cleaning procedures.
Procedures for cleaning parts and end-of-season storage.
Guidelines for storing and transporting the appliance.
Common problems, their causes, and suggested remedies.
Advice on preventing damage to surfaces during cleaning.
Official declaration of the product's compliance with EU directives.
Information regarding the product's warranty coverage and terms.
Key technical specifications and performance data of the appliance.
