Black & Decker CS1835

Questions and Answers

U
uraymondJul 27, 2025
Why Black & Decker chainsaw not starting?
- R
  ruizkaitlynJul 27, 2025
  Your Black & Decker chainsaw might not start due to several reasons: - The lock button might not be pressed. Make sure to press the lock button. - The front guard could be in the brake position. Try resetting the front guard. - A blown fuse could be the issue, in which case you should replace the fuse. - The RCD might be tripped, so check the RCD. - The mains lead might not be connected; ensure the mains supply is properly connected.
J
John JohnsonAug 2, 2025
Why is my Black & Decker CS1835 Chainsaw not cutting well?
- E
  Emily ScottAug 2, 2025
  Your Black & Decker chainsaw might not be cutting well because the chain is on backwards. Check the chain direction and correct it if needed. Also, the chain may need sharpening.
D
dpetersenAug 8, 2025
What to do if Black & Decker CS1835 Chainsaw is not using oil?
- K
  Kaylee ThompsonAug 8, 2025
  If your Black & Decker chainsaw is not using oil, it could be due to: - Debris in the tank: Empty the oil from the tank and replace it. - Blocked oil hole in the cap: Remove any debris from the hole. - Debris in the chain bar: Remove the debris and clean the chain bar. - Debris in the oil outlet: Remove the debris.
W
William HortonAug 14, 2025
What to do if Black & Decker CS1835 Chainsaw bar/chain appear hot or smoking?
- S
  Stacey WatkinsAug 14, 2025
  If the bar or chain of your Black & Decker chainsaw appears hot or is smoking, it could be due to several reasons: - The oil tank might be empty. Check the oil tank level and refill if necessary. - The oil hole on the chain bar could be blocked. Clean the oil holes and clear the groove around the edge of the chain bar. - The chain tension might be too tight. Check the chain tension and adjust accordingly. - The guide bar sprocket nose may need greasing. Oil the guide bar sprocket nose.
M
michelleklineAug 20, 2025
How to fix Black & Decker CS1835 chain that does not stop?
- R
  randyallenAug 20, 2025
  If the chain on your Black & Decker chainsaw does not stop within 2 seconds after switching it off, the chain tension might be too slack. Check the chain tension and adjust it accordingly.