What to do if my Black & Decker CS2245 Chainsaw will not start?
If your Black & Decker Chainsaw won't start, several factors could be the cause: * Ensure the lock button is pressed. * Check that the front guard is not in the brake position; if it is, reset it. * Inspect the fuse and replace it if it's blown. * Verify the RCD (Residual Current Device) hasn't tripped. * Confirm that the chainsaw is properly connected to the mains supply.
General| Power source | AC |
|---|---|
| Idle speed | - RPM |
| Chain pitch | 3/8 \ |
| Chain speed | 12.5 m/s |
| Product color | Black, Grey, Orange |
| Automatic oiling | Yes |
| Chain bar length | 450 mm |
| Oil tank capacity | 0.15 L |
| Noise level | 102.1 dB |
| Vibration emission | 5.5 m/s² |
Weight and Dimensions| Weight | 5660 g |
|---|
Read all safety warnings and instructions to prevent electric shock, fire, or serious injury.
Covers keeping the work area clean, avoiding sparks, and ensuring electrical safety.
Includes warnings specific to chainsaw use, handling, and maintenance.
Explains kickback triggers and provides techniques to avoid loss of control and injury.
Instructions for initial chain soaking, fitting the guide bar and chain, and checking tension.
Guidance on increasing chain tension and filling the oil reservoir for lubrication.
To Next Page