Why is my Black & Decker GKC1825 not using oil?
If your Black & Decker Chainsaw is not using oil, there might be debris in the tank. Empty the oil and replace it. Check for any blockage in the oil hole in the cap and remove any debris. Also, inspect the chain bar and oil outlet for debris, removing it as necessary. Clean the chain bar if needed.
How to fix a Black & Decker Chainsaw that will not start?
If your Black & Decker Chainsaw will not start, make sure that you press the lock button. Check that the battery is correctly fitted and charged. If not, fit or charge the battery. Try removing and re-fitting the battery to ensure it is properly connected.
What to do if Black & Decker Chainsaw does not cut well?
If your Black & Decker Chainsaw does not cut well, check if the chain is on backwards and correct the direction if needed. It may also require sharpening.
What to do if Black & Decker Chainsaw chain does not stop?
If the chain on your Black & Decker Chainsaw does not stop within 2 seconds after switching off the tool, check the chain tension.
What to do if my Black & Decker GKC1825 stops suddenly during use?
If your Black & Decker Chainsaw stops suddenly during use, it might be due to a depleted battery, requiring a recharge. Alternatively, the battery could be too hot; allow it to cool for at least 30 minutes before proceeding or charging. It could also be due to voltage limit protection; in this case, restart the chainsaw, let it work at its own pace, and avoid overloading it.
Why is my Black & Decker GKC1825 Chainsaw bar/chain hot/smoking?
If the bar or chain of your Black & Decker Chainsaw appears hot or is smoking, first check the oil tank level and refill if empty. Also, inspect the oil hole on the chain bar for blockages and clean them if necessary. Ensure the chain tension isn't too tight, and lastly, oil the guide bar sprocket nose.
General| Type | Cordless |
|---|---|
| Power Source | Battery |
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Battery Capacity | 2.0 Ah |
| Bar Length | 25 cm |
| Chain Speed | 3.5 m/s |
| Weight | 3.1 kg |
| Chain Drive Links | 40 |
| Chain Pitch | 3/8 inch |
Guidelines for maintaining a safe and clean work environment to prevent accidents and injuries during operation.
Precautions regarding electrical connections, grounding, and avoiding wet conditions to prevent electric shock.
Recommendations for operator alertness, protective equipment, and proper handling to ensure personal safety.
Guidelines on proper tool usage, maintenance, and storage to ensure safe and effective operation.
Instructions for safe charging, handling, and maintenance of battery packs to prevent hazards.
Guidelines for professional servicing and repair of power tools to maintain safety and performance.
Specific safety advice for compact chainsaws, covering protective gear, safe operation, and handling.
Understanding kickback causes and implementing operator techniques to prevent dangerous reactions.
Best practices for chainsaw operation, maintenance, and storage to ensure user safety and tool longevity.
Information on inherent risks, potential injuries, and vibration exposure during tool use.
Identifies potential causes and solutions for the chainsaw failing to start.
Addresses issues where the chain fails to stop within the specified time after switching off.
Diagnoses reasons for overheating of the bar and chain, such as oil issues or tension.
Solutions for problems like the chainsaw not cutting effectively or not using oil.
Troubleshooting steps for the chainsaw stopping unexpectedly during use.
Procedure for checking and maintaining the oil reservoir level for chain lubrication.
Instructions for cleaning, lubricating, and maintaining the saw chain and guide bar.
Guidance on keeping the saw chain teeth sharp for optimal performance and safety.
Instructions on how to regularly check and adjust the chain tension for proper operation.
Details on voltage, bar length, chain speed, cutting length, oil capacity, and weight.
Information on battery types, capacities, and charging times for various models.
Measured sound pressure, sound power, and vibration emission values.
Details on product compliance with UK and EC regulations and directives.
To Next Page