Need help?Do you have a question about the Black & Decker DP240 and is the answer not in the manual?
General| Voltage | 2.4V |
|---|---|
| Chuck Size | 1/4 inch |
| Battery Type | Ni-Cd |
| Chuck Type | Hex |
| No Load Speed | 180 RPM |
| Speed | 180 RPM |
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Precautions for power supply, grounding, and avoiding contact with earthed surfaces.
Advice on staying alert, using PPE, and preventing unintentional starting.
Instructions on tool operation, switch functionality, and proper disconnection.
Warnings about fasteners contacting live wires and protection against impact.
Advice on securing the workpiece and checking for hidden wiring before driving fasteners.
Guidance on supervision for children and users with reduced capabilities or lack of experience.
Explanation of declared vibration values and how actual use can affect levels.
Warning to read the instruction manual to reduce the risk of injury.
Information on the tool being double insulated and plug compatibility with outlets.
List and identification of key components like bit holder, spindle lock, and switches.
Description of risks like touching moving parts, prolonged use, noise, and dust hazards.
Instructions on how to charge the screwdriver, including plug insertion and release.
Procedure for attaching and detaching screwdriver bits using the bit holder.
How to operate the on/off and forward/reverse switch for tool control.
Advice on choosing the right bit, using lubricant, and spindle lock for tight screws.
Recommendations for drilling pilot and clearance holes for wood screws.
Information on compatible accessories, specifically 1/4" hexagonal shank bits.
Guidelines for cleaning ventilation slots and motor housing, and avoiding solvents.
Instructions for responsible disposal and recycling of the product and packaging.
Guidelines for safe disposal of batteries, preventing short circuits and fires.
Details on voltage, speed, weight, sound pressure, and vibration levels.
Statement of compliance with EU directives and EN standards for machinery.
Information on the 24-month guarantee, exclusions, and claiming procedures.
Instructions for registering your product online or by mail.
To Next Page
