To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker LI2000 and is the answer not in the manual?
Power| voltage | 3.6 V |
|---|---|
| no-load speed | 180 rpm |
| torque | 40 in-lbs |
Battery| battery type | Ión-Litio (recargable) |
|---|---|
| charging time | 12 hours |
Power| input voltage AR | 220 V ~ 50 Hz |
|---|---|
| input voltage B2C | 220 V ~ 50 Hz |
| input voltage B3 | 120 V ~ 60 Hz |
Output| output voltage | 9 V DC |
|---|---|
| output current | 100 mA |
Information on registering your new product and obtaining support.
Explains DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Precautions related to power tool plugs, cords, and preventing electric shock.
Measures to ensure operator safety, including staying alert and using protective equipment.
Guidelines for proper operation, maintenance, and handling to ensure safety and longevity.
Covers safe battery use, electrical shock prevention, and respiratory protection.
Details specific safety rules, California warnings, and explains tool label symbols.
Identifies and describes the main parts and controls of the Lithium Pivotdriver.
Instructions for safe battery use, charging, and storage to prevent hazards.
Steps for charging the tool, including initial charge duration and subsequent charges.
Key charging cautions and specific safety advice for drilling operations.
Procedures for operating in different modes and performing screw driving and drilling tasks.
Guidelines for tool cleaning, maintenance, and proper battery removal and recycling.
Addresses common problems, provides solutions, and lists recommended accessories.
Information on locating service centers and details of the product's warranty.
