Black & Decker Li4000 User Manual

INSTRUCTION MANUAL
CORDLESS SCREWDRIVER WITH
RETRACTABLE SCREW HOLDER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
Li4000
To register your new product, call 1-800-544-6986
or visit www.BlackandDecker.com/NewOwner

Black & Decker Li4000 Specifications

General

Idle speed (max)	180 RPM
Screw diameter (max)	- mm
Reverse	Yes
Power source	Battery

Summary

General Safety Guidelines

Safety Symbols Definitions

Explains DANGER, WARNING, CAUTION, and NOTICE symbols for hazard recognition.

Electrical Safety

Personal Safety

Power Tool Use and Care

Battery Tool Use and Care

Guidelines for using and caring for the tool's battery system.

Specific Safety Rules

Critical safety points for operation, including handling wiring and workpiece.

Specific Safety Rules Continued

Chemical Exposure Warning

Warning about chemicals in dust from certain activities and potential health risks.

Respiratory Protection

Use NIOSH/OSHA approved respiratory protection for dust exposure.

Eye Protection

Always wear ANSI Z87.1 certified eye protection; everyday glasses are not sufficient.

Battery Safety and Charging

Battery Warnings

Critical safety precautions for handling, using, and disposing of batteries.

Charging Warnings

Essential safety instructions for using the battery charger.

Charging Procedure and Notes

Charging Steps

Troubleshooting Charging

Drilling Safety and Operation

Drilling Safety Warning

Warning about tool stall during drilling and the importance of firm grip.

Assembly and Adjustment

Screw Driving Operation

Operation and Maintenance

Drilling Tips

Stalling Prevention

Troubleshooting and Accessories

Common Problems and Solutions

Addresses issues like battery not charging, tool not drilling, and stripping screws.