To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker EM100B and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | EM100B |
| Category | Monitor |
| Language | English |
Covers general handling, battery installation, and disposal guidelines for safe operation of the Power Monitor.
Provides first aid measures for accidental contact with liquid crystal material.
Confirms all required components are present in the product packaging before proceeding.
Instructions for attaching the stand to the Digital Display for freestanding placement.
Guide for inserting AA batteries into the Digital Display unit.
Procedure for installing AA batteries into the Meter Sensor unit.
Identifies and describes the components of the Meter Sensor unit.
Identifies and describes the buttons and screen elements of the Digital Display.
Instructions to find and record the Power Factor from an electromechanical meter.
Steps to prepare the Meter Sensor, including extending the sensor arm.
Procedure for attaching the Meter Sensor to an electromechanical meter.
Instructions to find and record the Power Factor from an electronic meter with an optical port on the face.
Steps to prepare the Meter Sensor, including attaching a rubber shim if needed.
Procedure for attaching the Meter Sensor to an electronic meter with an optical port on the face.
Instructions to find and record the Power Factor from an electronic meter with an optical port on top.
Steps to prepare the Meter Sensor, including reconfiguring the sensor arm and strap.
Procedure for attaching the Meter Sensor to an electronic meter with an optical port on the top.
Final steps for aligning and securing the Meter Sensor on the meter.
Explains flat rate billing and how to find and enter your billing rate.
Explains tiered billing and how to determine rates and thresholds.
Explains time-of-use billing and how to enter rates and time slots.
Provides an example electric bill for understanding flat rate billing.
Guides users to find their specific flat rate and calculate the total billing rate.
Illustrates a three-tier billing plan with rates and consumption thresholds.
Instructs on finding and recording tiered billing rates and consumption thresholds.
Provides an example of a three-rate time-of-use billing plan and data entry.
Guides on finding and entering time-of-use billing rates and time slot schedules.
Explains how to view accumulated electricity cost and cost per hour.
Explains how to view current electricity usage in kilowatts.
Details how to use the Tare function to measure individual appliance consumption.
Guidance on identifying the correct electric meter type.
Addresses problems with the Meter Sensor not functioning after installation.
Troubleshooting rapid flashing of the Meter Sensor status indicator.
Explains that extra flashes from the status indicator are normal.
Resolves the 'id' display issue during synchronization between sensor and display.
Addresses issues where power usage display is inaccurate or unexpectedly low.
Troubleshooting random data jumps and interference affecting consumption readings.
Addresses low battery warnings and recommendations for battery types.
Resolves problems with no data, sleep mode, or non-updating power usage displays.
Addresses incorrect temperature, erratic values, and total mismatches with bills.
Details FCC compliance statements and regulations for the device.
States the conditions for Industry Canada certification of the device.
Provides contact information for service centers and technical support.
