Black & Decker FP4150 - Care and Cleaning; Cleaning Tips

8
CARE AND CLEANING
This product contains no user serviceable
parts. Refer service to qualied service
professional.
Important: Always unplug your processor
from the outlet before cleaning.
CLEANING
Important: Blades and discs are sharp.
Handle carefully.
• Completely disassemble processor parts
before washing.
• Rinse parts immediately after processing
for easier cleaning.
• Wipe base and feet with a damp cloth
and dry thoroughly. Stubborn spots can
be removed by rubbing with a damp cloth
and a mild, nonabrasive cleaner. Do not
immerse base in liquid.
• All removable parts can be washed by
hand in hot water with dish soap or in the
dishwasher, top rack only. Hand-washing of
plastic parts will help to maintain the food
processor’s appearance.
• Do not use rough scouring pads or
cleansers on any plastic or metal parts to
clean.
• Do not allow blade or disc to soak in
water for long periods of time.
• Remember to clean the internal shaft of
the chopping blade. Use a brush to remove
any residual food particles.
CLEANING TIPS
• For quick clean up, combine 1 cup warm
water and a drop of liquid dish soap in the
food processor workbowl.
• Cover and process on LOW for about 30
seconds.
• Discard liquid and rinse thoroughly.
Important: Do not place the processor
parts in boiling liquids.
STORAGE
Caution: Blades and discs are sharp.
Handle carefully.
1. Wrap cord under base.
2. Assemble the parts onto the base in this
order: workbowl, center shaft, chopping
blade, slicing/shredding disc, workbowl
cover, food pusher.