Black & Decker GL4525 User Manual

12
ENGLISH
Maintenance
Your Black & Decker corded/cordless appliance/tool
has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool/
appliance care and regular cleaning.
Warning! Before performing any maintenance on
corded/cordless power tools:
♦ Switch off and unplug the appliance/tool.
♦ Or switch off and remove the battery from the ap-
pliance/tool if the appliance/tool has a separate
battery pack.
♦ Or run the battery down completely if it is integral
and then switch off.
♦ Unplug the charger before cleaning it. Your
charger does not require any maintenance apart
from regular cleaning.
♦ Regularly clean the ventilation slots in your tool/
appliance and charger using a soft brush or dry
cloth.
♦ Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based
cleaner.
♦ Regularly clean the cutting line and spool using
a soft brush or dry cloth.
♦ Regularly use a blunt scraper to remove grass
and dirt from the underneath of the guard.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled materi-
als helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once they
have reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest au-
thorised repair agent by contacting your local
Black & Decker offi ce at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
Technical data
GL4525 GL5028 GL5530
Type 1 Type 1 Type 1
Input Voltage V
AC
230 230 230
Power Input W 450 500 550
No-Load Speed min
-1
7300 7200 7300
Weight kg 2.0 2.1 2.3
Hand/arm weighted vibration value according to
EN 786: = 2.5 m/s
2
, uncertainty (K) = 1.5 m/s
2
.
L
PA
(sound preasure) 81 dB(A) uncertainty (K) =
1 dB(A)

Black & Decker GL4525 Specifications

General

Power source	-
Line diameter	1.5 mm
Product color	Red
Rotational speed	7300 RPM
Line length supplied	10 m
Cutting diameter (max)	- mm

Weight and Dimensions

Weight	2400 g