What to do if my Black & Decker GW2200 fails to operate?
If your Black & Decker Blower fails to operate, try the following: * Check the connection to the power supply. * Check the fuse in the plug, and if it’s blown, replace it (UK only). * Ensure the blow/vacuum tube assembly is correctly fitted to the powerhead. If the fuse continues to blow, disconnect from the mains and consult an authorized repair agent.
Why is my Black & Decker Blower vacuuming poorly and making a high-pitched whine?
If your Black & Decker Blower is vacuuming poorly and making a high-pitched whine, the issue could be due to a blockage or full collection bag. Here's what to do: * Switch off and disconnect the blower from the power supply to allow any debris to fall clear of the tube. * Remove and empty the collection bag. * Check that both the inlet and exit ports on the vacuum tube are clear. * Remove any debris from the fan area. If the problem persists, disconnect the blower from the mains and consult an authorized repair agent.
What to do if my Black & Decker GW2200 is shredding poorly?
If your Black & Decker Blower is shredding poorly, here are some steps you can take: * Switch off and disconnect the blower from the power supply; then remove the collection bag. * Remove the vacuum tube and inspect the fan. * Clean any debris from the fan blades. If the fan is cracked or damaged, do not use the blower and consult your local Black & Decker authorized repair agent.
General| Airspeed | 260 km/h |
|---|---|
| Bag capacity | 35 L |
| Product color | Red |
| Shredding function | Yes |
Weight and Dimensions| Weight | 3100 g |
|---|
Basic safety precautions for mains-powered/cordless appliances to reduce risk of fire, electric shock, and injury.
Keep work area clean, well-lit, avoid clutter, use PPE, stay alert, prevent unintentional start.
Match plugs to outlets, avoid wet conditions, do not abuse cords, use outdoor extension cords, use RCD.
Check for damaged parts, use authorized agents for repairs, keep cutting tools sharp.
Use approved outdoor extension cables, unwind completely from reels, inspect for damage.
Potential hazards from moving parts, part changes, prolonged use, noise, and dust inhalation.
Explains pictograms indicating warnings and safety instructions.
Instructions for assembling upper and lower vacuum tubes, with safety warnings.
Instructions for assembling the blow tube to the blow clamshell, with safety warnings.
How to switch the appliance on and off using the on/off switch.
How to use the cable restraint to secure the power cord.
Instructions for blow and vacuum modes, including collection bag use and scraper.
How to disconnect the blow/vacuum tube from the powerhead.
Checks for power supply, fuse, and tube assembly if the appliance fails to operate.
Solutions for poor suction or high-pitched whine, like checking bag, ports, and fan area.
Solutions for poor shredding, involving checking the vacuum tube and fan for debris.
Keep appliance clean and dry, clean ventilation slots and collection bag, use mild soap and damp cloth.
Instructions for safely replacing the mains plug in UK & Ireland, including fuse recommendations.
Information on proper disposal and recycling of the product.
Lists voltage, power, capacity, weight, and vibration values for the GW2200.
States product compliance with relevant EC directives like Machinery Directive.
Details Black & Decker's 24-month guarantee for manufacturing defects and conditions for claims.
Notes important corrections to be made when reading the instruction manual.
Instructions on how to fit and remove the transit and storage cap before use or storage.
To Next Page
