What to do if my Black & Decker LEDLIB Spotlight will not operate?
If your Black & Decker Spotlight won't operate, it might have shut down to prevent the battery from overheating due to extended use or charging. To resolve this, let the spotlight cool down for a few minutes before trying to use it again. Alternatively, the battery might be completely discharged. In this case, you should charge the unit as instructed in the manual.
Why is the battery/charge status LED indicator not lighting when charging my Black & Decker Spotlight?
If the battery/charge status LED indicator doesn't light up when charging your Black & Decker Spotlight, you can try the following: * Ensure the connection to the 12 Volt DC Charging Port is secure. * Verify the connection to both the AC and DC power source. * Make sure that there is a functioning AC or DC current. * Check the fuse in the 12 Volt DC Adapter to see if it's blown.
Defines hazard levels like Danger, Warning, and Caution.
Crucial precautions for using electrical appliances safely.
Instructions for charging the spotlight using the AC adapter.
Instructions for charging the spotlight using the DC adapter.
Guidance on battery service, replacement, and proper disposal.
Proper disposal methods for batteries to prevent hazards.
General| Bulb Type | LED |
|---|---|
| Power Source | Battery |
| Battery Type | Lithium Ion |
| Battery Voltage | 3.6V |
| Light Output | 90 lumens |
| Runtime | Up to 6 hours |
| Color | Black |
To Next Page