Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the
new plug.
Connect the blue lead to the neutral terminal.
@
Warning! No connection is to be made to the earth
terminal. Follow the tting instructions supplied with
good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
Technical data
Type
MTOS4
(14.4v)(H1)
MTOS4
(Max)(H1)
No-load speed min
-1
16300 18500
Oscillating
angle
Degrees 2.8 2.8
Weight kg 1.3 1.3
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 86.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 97.5 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Cutting wood (a
h, CW
) 4.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting metal (a
h, CM
) 7.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Sanding (a
h
) 10 m/s
2
, uncertainty (K) 1.5 m/s
2
EC Declaration of Conformity
Machinery Directive
%
MTOS4 oscillating tool
Black & Decker declares that these products described under
“technical data” are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-4:2014.These
products also comply with directives, 2014/30/EU and
2011/65/EU
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical le and makes this declaration on behalf of Black &
Decker.
Patrick Diepenbach
General Manager, Benelux
Black and Decker,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
20.12.2021
Declaration of Conformity
The Supply of Machinery (Safety) Regulations
2008
MTOS4 oscillating tool
Black & Decker declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-4:2014.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
8
ENGLISH
(Original instructions)
To Next Page
Loading...
