How To Use
4
PREPARING
THE IRON
Important: Follow this procedure to clean the iron and to
become familiar with its features.
Remove any labels or tags which may be attached.
Using the Water Fill Cup we have provided, fill the Water
Tank about 1/3 full with water. (See ”Filling With Water,“
page 5.)
Set the Temperature Selector Dial to the Indicator Mark
choosing Cotton or Linen settings (6 or 7) and preheat for
about 2 minutes. (See ”Starting The Iron,“ page 5.)
While ironing on an old cotton terry cloth towel for about
two minutes, try using each of the iron’s features.
Turn the Adjustable Steam/Dry Dial to the Indicator Mark
for (light), (medium), and (heavy) settings
to become familiar with the various settings. Use the self-
cleaning feature as described on page 9. Iron on the
towel for another minute or two.
Pump the Sray Button a few times to see the amount of
water that is released. (See Figure F, page 7.)
SPRAY
STEAM
SETTINGS
To Next Page
Loading...
Need help?
General
