FILLING WITH WATER
Using the Water Fill Cup we have
provided, pour water into the Water
Fill Hole until the water level reaches
the full mark on the Water Window.
(Figure A) Do not overfill. Refill as
necessary.
Ordinary tap water can generally be
used for ironing. However, do not use
water processed through a home
softening system.
In extremely hard water areas (over
180 parts per million) consider using
distilled or demineralized water. If
using distilled or demineralized water,
tap water should be used the first time
you use the iron and once per month
thereafter to maintain steam
performance.
STARTING THE IRON
Plug in the iron. After setting the
Temperature Selector Dial at the
Indicator Mark for the desired
temperature, press the PUSH ON
Button. (Figure B)
5
Figure B
To Next Page
Loading...
Need help?
General
