8
OPTION 2, STAY ON:
This setting keeps the slow cooker at the desired heat setting until turned off or the
setting is changed. There is no auto-warm on this setting.
a. Press the Select button until the setting you want lights up (warm, low, or high).
b. Press the Timer button and the display will blink ON. Press Start. The slow
cooker will then begin heating.
c. When ready to serve, press and hold the Power button
for 3 seconds to
turn the appliance off. Unplug.
Note: Do not keep foods on the Warm setting for more than 4 hours. Do not use the
Warm setting to cook.
• Unplug the appliance when not in use and always allow the slow cooker to
completely cool before cleaning.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING
IMPORTANT: Never immerse cooking base in water or other liquids.
1. Always unplug and allow to completely cool before cleaning.
2. Wash stoneware pot and glass lid in warm, soapy water. Remove the rubber
gasket and hand wash separately. If food sticks to the stoneware pot, fill with
warm, soapy water and allow it to soak before cleaning with a nonabrasive
scouring pad.
NOTE:
Do not use abrasive cleaners on the stoneware pot.
NOTE:
Both the stoneware pot and glass lid are dishwasher safe.
3. Rinse and dry thoroughly.
4. Wipe interior and exterior of the cooking base with a soft, slightly damp cloth
or sponge. Never use abrasive cleansers or scouring pads to clean the cooking
base, as they may damage the surfaces.
5. Allow to dry thoroughly before storing.
STORING
Make sure that the appliance is thoroughly dry. Never wrap the cord tightly
around the appliance; keep it loosely coiled. Placing the lid on upside-down
for storage can help save space.
To Next Page
Loading...