What to do if the automatic line feed on my Black & Decker Trimmer isn't working?
- EElizabeth HernandezJul 29, 2025
If the automatic line feed on your Black & Decker Trimmer isn't feeding line, especially when it shortens to approximately 76mm, here's what you can do: * Check if the line is crisscrossed on the spool. If so, unwind and rewind it neatly. * Inspect the spool for damage and replace if needed. * Ensure the cutting line protrudes about 122mm from the spool. Install a new spool if the line is insufficient. * Make sure you're using the correct 2.00 mm line size. * Clean the spool and housing carefully. * Check if the lever in the spool housing moves freely. * Replace the spool into the housing.