SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
1.
Do not load with more than 350 pounds.
2.
Do not apply an unbalanced load which could cause the
Work Center to tip over.
3.
Do not use the Work Center as a step-ladder or standing
platform. Do not use the lower platform as a step when the
Work Center is in Workbench" position.
4.
Do not store Work Center outdoors or in a damp location.
5.
Avoid applying excessive force when clamping with the
swivel grips.
6.
Be sure that the legs are fully open and be sure that the table
locks in the sawhorse position.
7.
When using a power tool with the Work Center, follow the
safety instructions in the tool's Instruction Manual.
8.
Always wear safety glasses when operating power tools.
9.
See "Using Power Equipment" in this manual for correct
method of securing power tools in the Work Center. Never
mount power tools directly in vise jaws; pressure may
damage tools.
10.
An even pressure of the vise jaws on the work piece is
essential. Tighten both vise jaws uniformly.
11.
When assembling your Work Center, use only the Special
Plastic Wrench provided. Use of other wrenches or sockets
can damage your Work Center.
fi
zz
~/A
-
350 11
SAVE THESE INSTRUCTIONS FOR FUTURE USE.
3
To Next Page