724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 3
Gigabit Smart Switch Eco Fanless Quick Start Guide
1. Overview
The Gigabit Smart Switch Eco Fanless is a standard switch that meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications.
The LGB2118A switch has (16) 10-/100-/1000-Mbps TP ports and (2) Gigabit SFP fiber transceiver slots. The LGB2124A switch has
(20) 10/100/1000Mbps TP ports and (4) Gigabit dual media TP/SFP transceiver slots. Both switches support http and SNMP
interfaces for switch management. The network administrator can logon to the switch to monitor, configure, and control each
port’s activity. In addition, the switch implements Quality of Service (QoS), VLAN, and Trunking.
The LGB2118A switch’s Ports 17 and 18 support SFP fiber modules (with LC connectors). The LGB2124A switch’s Ports 21, 22, 23,
and 24 include two types of media—TP and SFP Fiber (with LC connectors). The four combo ports on the LGB2124A support
10-/100-/1000-Mbps TP or 1000-Mbps SFP Fiber with auto-detection. A 1000-Mbps SFP Fiber transceiver is used for high-speed
connection expansion.
Table 1-1. 1000-Mbps SFP fiber transceivers.
Product Code Speed Connector/Distance Mode Component
LFP402 1000 Mbps LC, 2 km Multimode, 1300 nm SFP fiber transceiver
LFP401 1000 Mbps LC, 20 km Single-mode, 800 nm SFP fiber transceiver
LFP403 1000 Mbps LC, 40 km Single-mode SFP fiber transceiver
LFP404 1000 Mbps LC, 50 km Single-mode SFP fiber transceiver
2. What’s Included
Before you install the switch, verify that the package contains the following:
• 18- or 24-Port Gigabit Smart Switch Eco Fanless
• Mounting accessory (for 19" Rack Shelf)
• AC power cord
• This Quick Start Guide
To access the user manual PDF file, go to ftp://ftp.blackbox.com/anonymous/manuals/L/LGB2118A_rev1.pdf
If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or info@blackbox.com.
You might also need:
• SFP Modules (optional, LFP401, LPF402, LFB403, or LFP404, described in Table 2-1).
To Next Page
Loading...
