724-746-5500 | blackbox.com
Page 10
LPB2810A Quick Start Guide
724-746-5500 | blackbox.com
Chapter 2: Overview
• Port and System Status LEDs: The switch includes a display panel for system and port indications that simplify installation and
network troubleshooting. The LEDs are located on the left side of the front panels for easy viewing. Details are shown below
and in Tables 2-2 and 2-3:
Table 2-2: Port Status LEDs
LED Conditions Status
TP (Link/ACT)
Green
Lit Green when TP link is good; blinks when any
traffic is present.
TP Speed
Green
Lit Green when the TP link is on 1000 Mbps;
Blinks when the TP link is on 100 Mbps;
Off when the TP link is on 10 Mbps.
SFP (Link/ACT)
Green/Amber
Lit Green when the SFP link is on 1000 Mbps;
Lit Amber when the SFP link is on 100 Mbps;
Blinks when any traffic is present
Table 2-3: System Status LEDs
LED Conditions Status
Power
Green
Lit when power is on.
• Power Supply Socket: There is a standard 120-VAC power socket on the rear panel of the switch.
Figure 2-2. Back panel.
To Next Page
Loading...
