724-746-5500 | blackbox.com
Page 14
LPB2810A Quick Start Guide
724-746-5500 | blackbox.com
Chapter 4: Installation
4.4 What’s Included
• 10-, 26-, or 48-Port PoE+ Gigabit Managed Switch Eco (LPB2810A, LPB2826A, or LPB2848A)
• AC power cord
• (4) Adhesive rubber feet
• RS-232 to RJ-45 console cable (for LPB2810A and LPB2826A) or DB9 to DB9 console cable (for LPB2848A)
• (2) brackets
• (6) screws
• This quick start guide
• User’s manual on CD
NOTE: Call Black Box immediately if any of these items is missing or damaged.
WARNING: The SFP transceivers are Class 1 Laser Devices. Avoid direct eye exposure to the beam coming from the transmit port.
4.5 Mounting Instructions
The switch can be mounted in a standard 19-inch equipment rack or on a desktop or shelf.
Rackmounting
Before rackmounting the switch, check the following:
• Temperature: Since the temperature within a rack assembly may be higher than the ambient room temperature, check that the
rack environment temperature is within the specified operating temperature range of 32 to 104° F (0 to 40 ° C).
• Mechanical loading: Do not place any equipment on top of a rackmounted unit.
• Circuit overloading: Be sure that the supply circuit to the rack assembly is not overloaded.
• Grounding: Rackmounted equipment should be properly grounded.
To rackmount devices
Step 1: Attach the brackets to the device using the screws provided.
Figure 4-3. Attaching the brackets.
To Next Page
Loading...
