Black Horse Model FAIRCHILD 24W User Manual

Instruction Manual Book
Made in Vietnam.
Item code: BH177
95% ALMOST READY TO FLY
ONLY INCLUDING OLEO STRUTS.
ALL BALSA - PLY WOOD CONSTRUCTION.
COVERED WITH ORACOVER.
- Wingspan: 2,357 mm (92.79 in).
- Length: 1,610 mm (63.38 in).
- Weight: 7 kg (15.4 lbs).
- Wing area: 78.1 dm2.
- Wing loading: 89.62 g/dm2.
- Servo mount: 42mm x 21mm.
- Wing type: Naca Airfoil.
- Spinner: scale type (not included).
- Main gear type: Oleo struts,
for tail gear (included).
Parts listing required (not included):
- Radio: 06 channels minimum.
- Servo: 08 servos.
- Engine: 30 – 35cc gas (NGH 35cc recommended)
- Motor: Brushless outrunner 2500 - 3000W,
245KV.
- Propeller: Suit with your engine.
Recommended Motor and Battery set up
(not included):
- Motor: Admiral GP26 6330-245kV
- Lipo cell: 8-10 cells 4000 – 5500 mAh.
- Receiver battery: 6V/ 1200 – 2000 mAh.
- ESC: 80 - 120A.
SPECIFICATION
FAIRCHILD 24W
Gas and EP

Black Horse Model FAIRCHILD 24W Specifications

General

Brand	Black Horse Model
Model	FAIRCHILD 24W
Category	Toy
Language	English

Summary

Fairchild 24W: Introduction and Preparation

Model Specifications

Key technical specifications including wingspan, length, and weight.

Introduction and Safety Precautions

Welcome, company info, introductory text, and essential safety rules.

Flight Warnings and Building Notes

Critical warnings for safe flying and important advice for model assembly.

Tools, Supplies, and Parts List

Lists of required tools, adhesives, supplies, and parts not included.

Control Surface Assembly Procedures

Installing Ailerons, Flaps, and Servos

Attaching ailerons, flaps, and their respective servos to the wings.

Horizontal Stabilizer and Rudder Installation

Mounting the horizontal stabilizer and rudder onto the fuselage.

Elevator Linkage Installation

Connecting the elevator control surface to its servo via linkages.

Landing Gear and Engine Mounting

Main Landing Gear and Wing Struts

Mounting the main landing gear, wheel pants, and wing struts.

Tail Gear and Engine Installation

Installing the tail gear assembly and the aircraft's engine.

Systems Integration and Final Assembly

Throttle, Fuel System, and Cowl Mounting

Installing throttle, fuel system, and attaching the engine cowl.

Propeller and Wing Attachment

Mounting the propeller and securing the main wings to the fuselage.

Radio System and Cockpit Installation

Installing receiver, battery, switch, and cockpit components.

Electric Motor Installation (EP Version)

Specific steps for installing the electric motor for the EP variant.

Pre-Flight Checks and Operation Guidelines

Aircraft Balancing Procedure

Critical steps for checking and adjusting the aircraft's center of gravity (CG).

Control Throws and Flight Preparation

Recommended control throws and final checks before the first flight.

Flying Warnings and Guidelines

Essential warnings and operational guidelines for safe flying.