Black Horse Model P-40C TOMAHAWK User Manual

Instruction Manual Book
P-40C TOMAHAWK
Item code: BH161.
95% ALMOST READY TO FLY
Made in Vietnam
Parts listing required (not included):
Recommended receiver battery (not included):
SPECIFICATION
- Wingspan: 2,276 mm (89.5in).
- Length: 1,968 mm (77.5in).
- Weight: 10.8kg (24lbs).
- Wing area: 90.14dm
2
.
- Wing loading: 120 g/dm
2
.
- Wing type: Naca Airfoil.
- Servo mount: (42x 21)mm.
- Spinner: 115mm.
- Main gear type: Rotary 90 degree electric
retract gear and CNC suspension metal
struts (included).
- Tail gear type: Electric retract gear with
CNC suspension metal struts (included).
- Radio: minimum 7 channels.
- Servo: 9 servos Standard high torque servos.
- Engine: 50 - 60cc Gas.
- Motor: Brushless outrunner 5000 - 6500W, 230KV.
- Propeller: Suit with your engine.
- Motor: RIMFIRE. 50 cc.
- Lipo cell: 12 cells 5500 - 6000mAh.
- Receiver battery: 6.0V 2400-2600mAh (2 Packs).
- ESC: 120A.
ALL BALSA - PLY WOOD CONSTRUCTION.
COVERED IN A HEAT - SHRINK FILM WITH PRINTED.
INCLUDING ROTARY 90 DEGREE ELECTRIC RETRACT & ELECTRIC
RETRACT TAIL GEAR WITH CNC SUSPENSION METAL STRUTS.

Black Horse Model P-40C TOMAHAWK Specifications

General

Brand	Black Horse Model
Model	P-40C TOMAHAWK
Category	Toy
Language	English

Summary

SPECIFICATION

IMPORTANT MANUAL SECTIONS

SAFETY PRECAUTIONS AND FLIGHT WARNINGS

Essential safety guidelines and critical warnings for handling and flying the model.

WING ASSEMBLY

INSTALLING THE AILERONS AND FLAPS

INSTALLING THE AILERONS AND FLAPS SERVOS

LANDING GEAR INSTALLATION

INSTALLING THE AIR RETRACTABLE LANDING GEAR

INSTALLING THE TAIL GEAR

FUSELAGE COMPONENT INSTALLATION

INSTALLING THE FUSELAGE SERVOS

INSTALLING HORIZONTAL STABILIZER

INSTALLING VERTICAL STABILIZER

WING TO FUSELAGE JOINING

INSTALLING THE WING TO THE FUSELAGE

ENGINE AND FUEL SYSTEM SETUP

INSTALLING THE ENGINE MOUNT

Guide for securing the engine mount to the firewall.

INSTALLING THE ENGINE

Detailed instructions for mounting the engine.

INSTALLING THE FUEL TANK

Guide for correctly installing and connecting the fuel tank and lines.

INSTALLING THE THROTTLE

ELECTRONICS AND SWITCH INSTALLATION

INSTALLING THE SWITCH, RECEIVER AND BATTERY

Instructions for wiring receiver, battery, and switch.

INSTALLING THE SWITCH

FINAL ASSEMBLY AND MOTOR INSTALLATION

INSTALLING THE PROPELLER

INSTALLING THE ELECTRIC MOTOR

AIRPLANE BALANCING

BALANCING

Critical procedures for achieving correct center of gravity.

LATERAL BALANCE

FLIGHT CONTROL SETUP AND PREPARATION

CONTROL THROWS

Recommended control surface throws for optimal flight.

PRE-FLIGHT CHECK

Final checks and procedures before the first flight.

RADIO INSTALLATION DIAGRAM

BASIC CONNECTION FOR AIRPLANE AND ADJUSTMENT OF SERVOS

FLYING SAFETY AND GUIDELINES

I/C FLYING WARNINGS

Critical safety warnings for radio-controlled aircraft operation.

I/C FLYING GUIDELINES

Operational guidelines and best practices for flying the model.