EasyManua.ls Logo

Black Horse Model Spitfire 40 User Manual

Black Horse Model Spitfire 40
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction Manual book
Recommended R.C: 4 channels with
4-5 servos.
Propeller : 13 x 6.
Speed Control: 60A.
Electric Motor: AXI 2826/10.
Battery: 4-5 Cells-Li-Poly-14.8-18.5v- 5.000 mAh - 20
c
.
SPECIFICATION
Made in Vietnam.
Wingspan : 1,390mm. 54.75 in.
Length : 1,220 mm. 48in.
Weight : 2.4kg. 5.28lbs.
Parts Listing required (not included).
Glow Engine : 40-46 cu.in. 2 stroke.
52 cu.in. 4 stroke.
Question and Answer IconNeed help?

Do you have a question about the Black Horse Model Spitfire 40 and is the answer not in the manual?

Black Horse Model Spitfire 40 Specifications

General IconGeneral
BrandBlack Horse Model
ModelSpitfire 40
CategoryToy
LanguageEnglish

Summary

Spitfire 40 Specifications

Introduction and Preparation

Manual Overview and Warnings

Provides an introduction to the manual, essential warnings, and general advice.

Tools and Supplies Needed

Lists all necessary tools and supplies for assembly.

Parts Listing and Identification

Details all components included in the kit for identification.

Safety and Parts

General Safety Precautions

Essential safety guidelines for handling and operating the model aircraft.

Replacement Parts Information

Lists and illustrates parts available for replacement.

Aileron Assembly

Installing Aileron Servos

Step-by-step guide to installing aileron servos into the wing.

Installing Aileron Control Horns

Instructions for attaching aileron control horns to the wing surfaces.

Installing Aileron Linkages

Guide for connecting aileron servos to control horns.

Landing Gear and Wing Assembly

Installing the Landing Gear

Detailed steps for mounting the main and tail landing gear assemblies.

Wing Joining Procedure

Instructions for joining the two wing halves using a dihedral brace.

Installing the Engine Mount

Details options and steps for installing the engine mount.

Engine and Fuel System

Fuel Tank Installation

Guide for installing the fuel tank and its associated lines.

Engine and Throttle Installation

Steps for mounting the engine and connecting the throttle pushrod.

Cowling and Spinner

Cowling Installation

Steps for fitting the engine cowling over the engine and fuselage.

Installing the Spinner

Instructions for attaching the spinner backplate, propeller, and cone.

Stabilizer Installation

Horizontal Stabilizer Installation

Comprehensive guide for attaching the horizontal stabilizer to the fuselage.

Vertical Stabilizer Installation

Comprehensive guide for attaching the vertical stabilizer to the fuselage.

Tail Control Surfaces

Elevator Control Horns and Pushrods

Instructions for fitting elevator control horns and pushrods.

Rudder Control Horns and Pushrods

Instructions for attaching rudder control horns and pushrods.

Electronics Installation

Throttle Pushrod and Switch Installation

Installing throttle linkage, radio switch, and associated wiring.

Receiver and Battery Installation

Steps for installing the receiver and battery pack securely.

Final Assembly and Checks

Mounting the Tail Wheel Bracket

Instructions for attaching the tail wheel bracket to the fuselage.

Wing Attachment

Steps for securing the main wing assembly to the fuselage.

Flight Preparation

Balancing the Airplane (Center of Gravity)

Critical steps for achieving the correct center of gravity for safe flight.

Setting Control Throws

Recommended control surface movements for optimal flight performance.

Pre-Flight Checklist

Final checks to ensure the model is safe and ready for flight.

Related product manuals