Black Stone 1819 - Assembly Instructions; Step-by-Step Assembly

! WARNING
The manufacturer has made
every eort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially
as noted in these instruc-
tions. Wear protective
gloves if necessary.
! WARNING
The use of alcohol, prescrip-
tion or non-prescription
drugs may impair the
consumer’s ability to prop-
erly assemble or safely
operate the appliance.
! CAUTION
Two people are recom-
mended for the assembly
of this product.
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Make sure all
the plastic packing material is removed before assembling
Find a large, clean area to assemble your griddle. Please refer to the parts list
and assembly diagrams as necessary.
Griddle assembly involves large components; therefore, it is advised to
have two people assemble the unit.
STEP 
Remove the Griddle & Charcoal Grill Combo body from the box
and lay the unit upside down on the at surface.
STEP 
Install the two (2)
wheels to the right legs.
STEP 
Using both braces, assemble the right legs together with (4)
M6x12 screws. Use one (1) additional M6 Screw and Nut to add the propane
tank hanger to the top leg support.
STEP 
Install the legs to the body with eight (8) M6x12 screws being
sure the threaded holes and propane tank hanger are facing outwards.
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
Propane tank
hanger hardware
Threaded hole
Propane
tank hanger
M6x12
Screws
Model 1819 | Owner’s Manual | | Owner’s Manual | Model 1819
08 09
Assembly Guide Assembly Guide