Black Stone 1939 - Page 15

BLACKSTONEPRODUCTS.COM/SUPPORT
ENGLISH
| OWNER’S MANUALTROUBLESHOOTING
STEP 06
Carefully replace burners
and reattach.

The gas rail fuel nozzle
must be reengaged within the
burner opening.
STEP 01
Ensure that the gas is turned OFF at control knobs and gas
supply. Remove the cooking top.
CLEANING THE BURNER ASSEMBLY
STEP 02
Carefully detach and
remove the burner.
STEP 03
Clean the inside of
the burner:
• Run a narrow bottle brush
through each burner tube
several times. (DO NOT use
wire brushes)
• Run a sti wire bent into a small
hook through each burner tube
several times.
• Use compressed air to blow
through the burner tube and
out the burner ports. Check that
air blows through each hole.
(Wear eye protection)
STEP 04
Brush entire
outer surface of burner to
remove grime.
STEP 05
Clean any blocked ports
with sti wire such as an open
paper clip.
VIDEO TUTORIAL
How to Clean Your Burner Tube
 youtube.com/watch?v=xKQTCrFCzf8
CUSTOMER SERVICE
Visit us online at blackstoneproducts.com/support
for assistance concerning appliance use, replacement parts, or
your warranty.
CUSTOMER SERVICE HOURS:

Monday – Friday
7:00 am – 5:00 pm (MST)
Fuel nozzle
Fuel nozzle
Burner opening
Burner opening
CUSTOMER SERVICE
Visit us online at BlackstoneProducts.com/support
for assistance concerning appliance use, replacement parts, or
your warranty.
CUSTOMER SERVICE HOURS:

Monday – Friday
7:00 am – 5:00 pm (MST)
MODELS:   
