ENGLISH
BLACKSTONEPRODUCTS.COM/SUPPORT
OWNER’S MANUAL | USING YOUR BLACKSTONE
STEP 03
Turn gas ON at the LPG
cylinder by turning the OPD
hand wheel counterclockwise 1
to 3 turns.
2. BATTERY POWERED IGNITION
DO NOT lean over the appliance while lighting.
STEP 01
Insert one (1) AA
battery (not included) under the
ignitor button.
Screw the button into place over
the positive terminal.
STEP 02
❶
Turn the control knob to OFF.
STEP 04
❷
Push and hold the ignitor button.
❸
Push and turn the control knob counter-clockwise to HIGH.
(Release the ignitor button when the burner lights.)
❹
Adjust the temperature to desired level.
IGNITION INSTRUCTIONS
1. CHECK VALVES
STEP 01
Turn knob to OFF position.
STEP 02
Push in knob and release. Knob should spring back.
If knobs
DO NOT
spring back, replace valve assembly before using appliance.
spring back, replace valve assembly before using appliance.
STEP 03
Rotate knob to LOW then turn back to OFF. Knob should
turn smoothly.
WARNING
If burner does not ignite with open LPG cylinder valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
Ensure gas is o at the supply shut o valve before checking
appliance valves.
❷
❸
❶
❹
HEALTHY BURNER FLAME
PATTERN
HEALTHY BURNER FLAME
PATTERN
BURNER FLAMES ARE YELLOW
OR IRREGULAR
BURNER FLAMES ARE YELLOW
OR IRREGULAR
3. CHECK BURNER FLAME
Always check burner flame
before use.
STEP 01
Light burners and rotate
knobs from HIGH to LOW.
STEP 02
Look below the cooking
top to view burners. When knob
is at HIGH, flames should be
larger than when knob is at LOW.
3. CHECK BURNER FLAME
Always check burner flame
before use.
STEP 01
Light burner and rotate
knob from LOW to HIGH.
STEP 02
Look below the turntable
to view burner. When knob is at
HIGH, flames should be larger
than when knob is at LOW.
❶
❶
Flickers of yellow color.
❷
Dark blue color.
❸
Vibrant blue.
❶ ❶
Flickers of yellow color.
❷ ❷
Dark blue color.
❸ ❸
Vibrant blue.
WARNING
A clogged burner can
lead to a fire beneath the
appliance.
Burner should be removed
and cleaned annually or
whenever heavy build-up
or insects/insect nests are
found.
WARNING
A clogged burner can
lead to a fire beneath the
appliance.
Burner should be removed
and cleaned annually or
whenever heavy build-up
or insects/insect nests are
found.
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter.
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter.
❶
❷
❸
MODEL: