BLACKSTONEPRODUCTS.COM/SUPPORT
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDEMODELS:
STEP 19
Insert one (1) drawer handle into two (2) handle standos.
Use two (2) M6x15 screws [a.] to attach one (1) drawer handle to the
lower drawer front panel.
STEP 20
Use seven (7) M5x10 screws [b.] to attach one (1) drawer
body to the upper drawer front panel.
STEP 21
Insert one (1) drawer handle into two (2) handle standos.
Use two (2) M6x15 screws [a.] to attach one (1) drawer handle to the
upper drawer front panel.
STEP 22
Pull out the four (4) drawer sliding tracks from the left and
right drawer panels. Insert the upper and lower drawer sliding tracks
into the cart tracks. (Note: the upper drawer front panel is shorter,
and the lower drawer front panel is taller.)
STEP 23
Use two (2) M5x10 screws [b.] to attach the paper towel
holder to the front-left leg.
STEP 24
Use four (4) M6x15 screws [a.] to attach one (1) garbage bag
bracket (A) to the front-right leg, and one (1) garbage bag bracket (B)
to the back-right leg.
A
B
To Next Page
Loading...
