HOW TO USE YOUR FIRE PIT
RECOMMENDED FUEL: WOOD
LIGHTING WOOD:
01
Place your fire starter in the middle of your Smokeless Fire Pit.
02
Use a long lighter to light the fire starter.
03
Start adding sticks, chunk wood or kindling slowly. As your pieces
of wood catch fire, add more as needed.
NEVER stack wood higher than Smokeless Fire Pit’s interior vent
holes. Doing so will cut o airflow, and will cause your fire to smoke.
Make sure wood is resting under the holes, and that the holes are
clearly visible after fueling.
04
Add wood as needed to keep it burning continuously.
⚠ WARNING
DO NOT leave unattended while hot or cooling o.
⚠ CAUTION
After use, allow fire to burn itself out. Damage and injury
could result from using water to extinguish fire.
BLACKSTONEPRODUCTS.COM/SUPPORT
| OWNER’S MANUAL
ENGLISH
To Previous Page
Loading...
