Black Widow BW-0101 - Installing the Stop Bar Connecting Rod; Installing the Foot Pedal

Page 5
SAFETYOPERATIONMAINTENANCE ASSEMBLY SAFETYOPERATIONMAINTENANCE SETUP
Installing the Stop Bar Connecting Rod
1. Insert the two ends of the Stop Bar Connecting Rod (40)
into the sleeves on the Right and Left Stop Bars (41, 44).
2. Secure the Stop Bar Connecting Rod in place
with two Nuts (42). See Figure D.
Nut (42)
Right Stop Bar (41)
Left Stop Bar (44)
Stop Bar Connecting Rod (40)
Figure D
Installing the Foot Pedal
1. Insert the Foot Pedal (27) into its
holder on the Bottle Jack (30).
2. Secure Foot Pedal in place using the Foot
Pedal Bolt (28). See Figure E.
Figure E
Bottle Jack (30)
Foot Pedal Bolt (28)
Foot Pedal (27)