Black Widow MX-600X User Manual

Page 1Rev. 061318
DiscountRamps.com • 1-888-651-3431
Steel Motorcycle Carrier
Instructions for Part# MX-600X
General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and prac-
tice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety
• Do not exceed the carrying capacity of 600 lbs.
• Never exceed the maximum tongue weight rating of your trailer hitch (check the weight sticker on
the trailer hitch).
• Check with the vehicle dealer or manufacturer to determine the carrying/hauling capacity of your
vehicle.
• Total hauling weight is calculated by adding the total weight of the motorcycle + 99 lbs (MX-600X
weight).
• Some vehicles may require air shocks or heavier springs to sti󰀨en up the suspension to prevent
sagging.
• Not for use with 1-1/4" Class II or smaller receivers.
Tools Required
• 13mm wrench • 17mm wrench

Black Widow MX-600X Specifications

General

Brand	Black Widow
Model	MX-600X
Category	Automobile Accessories
Language	English

Summary

General Guidelines

User Responsibility and Product Care

Emphasizes user responsibility for reading instructions, keeping them with the product, and ensuring safe operation.

Product Inspection and Modification

Instructs users to inspect the product for defects before use and prohibits any modifications.

General Safety Precautions

Advises using common sense and general safety measures due to the impossibility of addressing all circumstances.

Safety Warnings

Carrying Capacity Limits

Warns against exceeding the 600 lbs carrying capacity and the trailer hitch's tongue weight rating.

Vehicle Hauling Capacity

Recommends checking with the vehicle dealer/manufacturer for the vehicle's carrying/hauling capacity.

Total Hauling Weight Calculation

Explains how to calculate total hauling weight by adding motorcycle weight plus 99 lbs for the carrier.

Suspension and Receiver Compatibility

Notes potential need for suspension upgrades and restricts use with 1-1/4" Class II or smaller receivers.

Assembly Instructions

Step 1: Attach Support Brackets

Secure carrier support brackets to the main hitch tube using M8x20 bolts and M8 nuts, keeping them loose.

Step 2: Install Carrier Track

Slide carrier track between support brackets and secure with M8x45 bolts and M8 nuts, tightening securely.

Step 3: Mount Ramp Holder Bracket

Secure the ramp holder bracket to the carrier track using M10x70 bolts and M10 nuts, keeping them loose.

Step 4: Attach Ramp

Place ramp onto hitch tube and holder bracket, securing with wing nuts and tightening bolts.

Step 5: Install Pins and Eye Bolts

Slide long pins into carrier track sides, secure with clips, and install eye bolts into the main hitch tube.

Step 6: Stabilize Carrier

Details two methods for stabilizing the carrier using anti-tilt bracket with hitch pin or pinch bolt.

Product Warranty and Liability

General Product Warranty

Defines warranty for defects in material and workmanship, non-transferability, and exclusion of non-authorized dealers.

Warranty Period and Service

States a one-year warranty period and outlines warranty service details, including part replacement.

Warranty Limitations

Lists exclusions such as repairs, modifications, misuse, accidents, and normal wear and tear.

Limited Liability

Excludes liability for indirect, incidental, or consequential damages arising from product use.