Need help?Do you have a question about the Blackmagicdesign Web Presenter HD and is the answer not in the manual?
General| Power Supply | 12V DC |
|---|---|
| Streaming | Yes |
| Video Inputs | HDMI |
| Video Outputs | HDMI, SDI |
| Audio Inputs | HDMI, SDI |
| Audio Outputs | HDMI, SDI |
| Resolution | 1080p |
| Streaming Protocols | RTMP |
| Ethernet | 10/100/1000 Base-T |
| Supported Resolutions | 1080p, 720p |
| Frame Rate | 23.98, 24, 25, 29.97, 30, 50 and 59.94, 60 |
| Compatibility | Mac and Windows |
How to connect the device to a power source using IEC or 12V DC input.
How to connect video and audio sources via SDI input for monitoring on the LCD.
How to connect an HDMI or SDI monitor to the output ports for broadcast monitoring.
How to connect to a computer via USB for setup utility and firmware updates.
How to connect to the internet using an Ethernet cable for streaming.
Button to start and stop streaming; illuminates red when active.
Button to stop streaming.
Navigating settings via the Menu button and rotary knob.
Button to lock the panel to prevent accidental changes.
Shows Duration Counter, Data Rate, Internet Connection, and On Air Status.
Shows Video Monitor and Audio Meters.
Shows the percentage of built-in memory cache in use.
Covers Input View, On Air Status, and Live Stream panels.
Details on video input standard, colorimetry, ancillary data, timecode, and captions.
To Next Page