7
ENGLISH
(Original instructions)
Fastening
u Select forward or reverse rotation using the forward/
reverse slider (2).
u To switch the tool on, press the on/off switch (1).
u To switch the tool off, release the on/off switch (1).
Hints for optimum use
Screwdriving
u Always use the correct type and size of hex key.
u If hex bolts are difcult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.
u Always hold the tool and hex key in a straight line with the
hex bolt.
Note: This unit can also accept standard hex screwdriver bits.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any cleaning or maintenance on
the tool, unplug from the charger.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BCRTA01
Voltage V
DC
3.6
No-load speed min
-1
180
Hardstalltorque Nm 5.5
Max.torque Nm 5.5
Chuck mm 6
Weight kg 0.4
Battery
Battery type Li-Ion
Ah rating 1.5Ah
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 57 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 68 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Screwdriving without impact (a
h
) 0.5 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
BCRTA01 Driver
Black & Decker declares that these products described under
“technical data” are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the techni-
cal le and makes this declaration on behalf of
Black & Decker.
Ed Higgins
Director – Consumer Power Tools
Black & Decker Europe, 270 Bath Road, Slough,
Berkshire, SL1 4DX
United Kingdom
17/02/2020
Guarantee
Black & Decker is condent of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent.
Terms and conditions of the Black & Decker 2 year guarantee
and the location of your nearest authorised repair agent
can be obtained on the Internet at www.2helpU.com, or by
contacting your local Black & Decker ofce at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
To Next Page
Loading...
