Need help?Do you have a question about the Black+Decker BDCDC18 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Battery Type | Lithium-ion |
| Battery Capacity | 1.5Ah |
| Chuck Size | 1/4 inch |
| Max Torque | 30 Nm |
| Type | Cordless Screwdriver |
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Keep work area clean, avoid explosive atmospheres, keep children away.
Ensure proper plugs, avoid contact with earthed surfaces, protect from water.
Stay alert, use PPE, prevent unintentional starting, dress properly.
Check for damage, misalignment, or binding; repair if necessary.
Maintain sharp cutting tools for reduced binding and better control.
Use tool and accessories as instructed to prevent hazardous situations.
Covers battery handling, storage, and liquid ejection precautions.
Ensure tool servicing by qualified personnel with identical parts.
Use auxiliary handles and hold by insulated surfaces when near hidden wiring.
Secure workpiece and check for utilities before drilling.
Avoid touching drill bit tip immediately after use due to heat.
Tool use requires capability; supervise children to prevent misuse.
Be aware of risks like moving parts, prolonged use, hearing, and dust.
Declared vibration values measured per EN 60745 for comparison.
Actual vibration levels may differ from declared values based on use.
Evaluate actual conditions and usage cycles for safety measures.
Symbol indicates the necessity to read the instruction manual for safe operation.
Lists key features such as variable speed, chuck type, and LED light.
Avoid opening, water exposure, store within temperature limits; charge properly.
Use correct charger, avoid damaged batteries, keep charger dry.
Step-by-step instructions for charging the battery using the specified charger.
Operate the tool at its intended pace without exceeding its capacity.
Insert battery pack into tool until an audible click is heard.
Depress the release button and pull the battery pack out of the tool.
Select operating mode and set torque for screw tightening.
Instructions for inserting and securing drill bits or accessories.
Use the slider to select the direction of rotation.
Press switch to operate; speed is controlled by trigger pressure.
Use sharp bits, secure work, apply steady pressure, and hold firmly.
Select appropriate bits and use lubricants for drilling specific materials.
Use correct bits, consider lubrication, and maintain tool alignment.
Check battery charge, charger, and outlet for power issues.
Verify charger connection, outlet, and ensure battery is within temperature range.
Allow battery to cool if it reached thermal limit or recharge if depleted.
Clean ventilation slots, motor housing, and chuck; avoid abrasive cleaners.
Recycle electrical products and batteries according to local regulations.
Lists voltage, speed, torque, capacity, and weight of the drill.
Provides specifications for various chargers and battery packs.
Details voltage, capacity, and type for the BL4018 battery model.
Presents sound pressure, sound power, and vibration values as per EN 60745.
Confirms product compliance with relevant EU directives and standards.
Outlines the 24-month guarantee and procedures for making a claim.
To Next Page
