Need help?Do you have a question about the Black+Decker BDCSFL20 and is the answer not in the manual?
General| Type | Cordless Screwdriver |
|---|---|
| Voltage | 4V |
| Battery Type | Lithium-ion |
| LED Light | Yes |
| Max RPM | 180 RPM |
| Pivot Feature | Yes |
| Max Torque | 35 in-lbs |
| Chuck Size | 1/4 in |
| Chuck Type | Quick-release |
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Keep work area clean, well lit, and free from children and bystanders during operation.
Match power tool plugs to outlets, avoid body contact with grounded surfaces, and keep tools dry.
Stay alert, use PPE, prevent unintentional starting, and maintain good balance and footing.
Do not force tools, ensure switches work, disconnect power before adjustments, and store safely.
Have power tools serviced by qualified personnel using identical replacement parts.
Hold by insulated grips, secure workpiece, and use attachments as intended to prevent injury.
Ensure others, especially children, are not near the operating machine and follow local age restrictions.
Do not open, expose to water, or store in extreme temperatures. Charge within specified limits.
Use the specified charger, do not charge damaged or non-rechargeable batteries, keep dry.
Charge battery before first use or when power is low. Leave connected for 10 hours.
Lock the tool before fitting/removing bits. Push bit into holder until it locates.
Press and hold the trigger switch to operate; release to switch off.
Use forward for tightening, reverse for loosening. Center position locks the tool.
Press the button to set the handle to one of three positions for versatile use.
To Next Page
