Need help?Do you have a question about the Black+Decker BD40 and is the answer not in the manual?
General| Brand | Black+Decker |
|---|---|
| Model | BD40 |
| Category | Power Screwdriver |
| Language | English |
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Always wear eye protection. Protective equipment reduces personal injuries.
Do not force the power tool. Use the correct power tool for your application.
Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect operation.
Recharge only with the charger specified by the manufacturer.
Keep it away from other metal objects to prevent shorting.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring.
Read all safety warnings and instructions for the battery, charger and power tool.
Read all safety warnings and instructions for the battery, charger and power tool.
Do not charge the battery at ambient temperatures below 40° F (4,5° C) or above 104° F (40° C).
The 5 torque setting lights act as charging indicator lights.
All users and bystanders must wear eye protection that conforms to ANSI Z87.1.
Clean out your tool often, especially after heavy use.
Vibration caused by the operating action of this tool may cause permanent injury to fingers, hands and arms.
This tool uses screwdriver bits with a 1/4" (6,35 mm) hexagonal shank.
Slide the rotational direction switch forwards for clockwise, backwards for counter-clockwise rotation.
Slide the rotational direction switch to the middle position to lock the spindle.
Select torque positions 1-5 using the torque selection button.
Your BLACK+DECKER tool has been designed to operate over a long period of time with a minimum of maintenance.
Blow dirt and dust from all ventilation ducts with dry air, at least once a week.
Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center.
This product must not be disposed of with normal household waste. Make this product available for separate collection.
Details on voltage, speed, torque, screw diameter, and charging connection.
Details on input voltage, frequency, output voltage, current, and charge time.
Details on battery voltage, capacity, and type.
Possible causes and solutions for the unit failing to start.
Possible causes and solutions for the battery failing to charge.
Possible causes and solutions for the unit shutting off abruptly.
Information on BLACK+DECKER's network of company-owned and authorized service locations.
To Next Page
