EasyManuals Logo

Black+Decker BDCHD12S1 User Manual

Black+Decker BDCHD12S1
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
ENGLISH
(Original instructions)
Children should be supervised to ensure
that they do not play with the appliance.
Residual risks
Additional residual risks may arise when
using the tool which may not be included in
the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks
cannot be avoided. These include:
Injuries caused by touching any
rotating/moving parts.
Injuries caused when changing any parts,
blades or accessories.
Injuries caused by prolonged use of a
tool. When using any tool for prolonged
periods ensure you take regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust
developed when using your tool
(example: working with wood, especially
oak, beech and MDF).
Labels on tool
The label on your tool may include the
following symbols:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
The charger is intended for indoor
use only.
Read this entire manual carefully
before using the appliance.
Position of date barcode
The Date Code, which also includes the year
of manufacture, is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
Electrical safety
Your charger is double insulated;
therefore no earth wire is required.
Always check that the mains voltage
corresponds to the voltage on the rating
plate. Never attempt to replace the charger
unit with a regular mains plug.
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Batteries
Never attempt to open for any reason.
Do not expose the battery to water.
Do not store in locations where the
temperature may exceed 40 °C.
Charge only at ambient temperatures
between 10 °C and 40 °C.
Charge only using the charger provided
with the tool.
When disposing of batteries, follow the
instructions give in the section
"Protecting the environment".
Do not attempt to charge damaged
batteries
.
Chargers
Use your BLACK+DECKER charger only
to charge the battery in the tool with
which it was supplied. Other batteries
could burst, causing personal injury and
damage.
Never attempt to charge
non-rechargeable batteries.
Have defective cords replaced
immediately.
Do not expose the charger to water.
Do not open the charger.
Do not probe the charger.
The charger is intended for indoor
use only.
Read the instruction manual before
use.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Black+Decker BDCHD12S1 and is the answer not in the manual?

Black+Decker BDCHD12S1 Specifications

General IconGeneral
BrandBlack+Decker
ModelBDCHD12S1
CategoryPower Tool
LanguageEnglish

Related product manuals