Need help?Do you have a question about the Black+Decker KX1650 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Heat settings | 2 |
| Power | 1750 W |
| Voltage | 230 V |
| Weight | 0.7 kg |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, and/or serious injury.
Match plugs to outlets, avoid grounded surfaces, protect from wet conditions, do not abuse cord, use outdoor extension cords, use RCD in damp locations.
Stay alert, use PPE, prevent unintentional starting, remove keys, maintain footing and balance.
Do not use outdoors, place on stand when not in use. Be careful with combustible materials.
Handle with extreme care due to lead content. Lead exposure causes irreversible damage, especially to children and pregnant women.
Determine if paint contains lead before work. Do not smoke, eat, or drink in contaminated areas. Professionals should remove lead paint.
Tool has a thermostat for safety. Continuous use may cause overheating; allow regular cool-down intervals.
Heat paint, scrape immediately when soft. Keep nozzle 25mm from surface. Scrape with grain, avoid debris build-up.
Allow nozzle to cool for at least 30 minutes after use. Place on stand and secure cable.
Offers a 24-month guarantee against defects in materials or workmanship, subject to terms.
Ensure plug compatibility, avoid contact with grounded surfaces, protect from water, and do not misuse the cord.
Do not use outdoors. Place on stand when not in use. Be aware of combustible materials.
Do not overheat, avoid explosive atmospheres, ensure ventilation, do not direct hot air at people/animals.
Do not touch hot nozzle. Do not place nozzle against objects. Ensure air intake/outlet are not obstructed.
To Next Page
