EasyManua.ls Logo

Black+Decker BDCT450 - Assembly; Assembling Method; Battery Safety Warning

Black+Decker BDCT450
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assembly
Assembling Method:
1. Take the machine out from the packaging
2. Carefully place the unit on a stable surface in an upright position
3. Remove all plastic packaging from the machine.
4. Locate the remote control before throwing the packaging away.
6
WARNING: Heater must not be used without base installed.
Base has been pre-installed by the supplier and is non-detachable.
The remote control supplied with this appliance uses a CR2032 coin type battery.
DANGER IF SWALLOWED
Keep batteries out of reach of children. Swallowing may lead to serious injury or
death in as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room.
Dispose of used batteries immediately.

Related product manuals