ENGLISH
9
TROUBLESHOOTING
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center
nearest you or call the BLACK+DECKER help line at: 1–800–544–6986.
Problem Possible Cause Possible Solution
Unit will not start. Fan cover or vac tube not installed.
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
Install fan cover for blow mode or vac tube for
vac mode.
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly
causes the circuit fuse to blow, discontinue
use immediately and have it serviced
at a BLACK+DECKER service center or
authorized servicer.)
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center or
authorized servicer.)
Have cord or switch replaced at BLACK+DECKER
Service Center or Authorized Servicer.
Unit jammed or clogged. Debris blocking inlet/outlet or fan. Unplug power cord. Remove vac tube. Refer to
Cleaning - Maintenance.
To Next Page
Loading...
Need help?
General
