Black+Decker BXAP60E - Specifications; Warranty and Technical Assistance

ENGLISH
(Original instructions)
8
SUPPLIES
♦ Supplies can be acquired from distributors and
authorised establishments (such as lters, etc.) for your
appliance model.
♦ Always use original supplies, designed specically for
your appliance model.
♦ Only the following type of supplies must be used with the
appliance.
♦ Filters
SPECIFICATIONS:
♦ Protection degree: IPXO
♦ Applied part type: BF
♦ Weight: 1,7 kgs
♦ Acoustic pressure level < 40dB
♦ Operating temperature: 0°C - 35°C
♦ Storage temperature: -15°C - 45°C
♦ Continuous operation with short-time loading.
♦ Not suitable for use in presence of ammable anaesthet-
ic mixture with air or with Oxygen or nitrous oxide.
♦ NB: These specications are subject to change without
notice of purpose of improvement.
♦ NB: By virtue of the conditions of fabrication of this
product, the maximum absorbed power can differ from
that specied.
ANOMALIES AND REPAIR
♦ Take the appliance to an authorised technical support
service if problems arise. Do not try to dismantle or
repair without assistance, as this may be dangerous.
FOR EU PRODUCT VERSIONS AND/OR
IN THE CASE THAT IT IS REQUESTED IN
YOUR COUNTRY: ECOLOGY AND RECY-
CLABILITY OF THE PRODUCT
♦ The materials of which the packaging of this appliance
consists are included in a collection, classication and
recycling system. Should you wish to dispose of them,
use the appropriate public containers for each type of
material.
♦ The product does not contain concentrations of
substances that could be considered harmful to the
environment.
This symbol means that in case you wish to
dispose of the product once its working life has
ended; take it to an authorised waste agent for
the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
This appliance complies with Directive 2014/35/EU on
Low Voltage, Directive 2014/30/EU on Electromagnetic
Compatibility, Directive 2011/65/EU on the restrictions of
the use of certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/EC on the
ecodesign requirements for energy-related products.
WARRANTY AND TECHNICAL
ASSISTANCE
This product enjoys the recognition and protection of the
legal guarantee in accordance with current legislation. To
enforce your rights or interests you must go to any of our
ofcial technical assistance services.
You can nd the closest one by accessing the following
web link: http://www.2helpu.com/.
You can also request related information, by contacting us
(see the last page of the manual).
You can download this instruction manual and its updates
at http://www.2helpu.com/.
The following information is regarding to energy labelling
and ecodesign:
Trademark and address Black+Decker,
Avda. Barcelona, s/n,
Oliana, 25790, Spain
Model BXAP60E
Input Voltage 100-240 V
Input AC frequency 50/60 Hz
Output voltage 12,0 V
Output current 1,5 A
Output power 18,0 W
Average Active Efciency 86,27 %
Efciency at low load (10%) 82,78 %
No-load power consumption 0,09 W
To establish compliance with the ecodesign requirements
and for calculation of energy labelling parameters the
appliance the European standard EN 50563 is used as
reference.