What to do if the filter basket overflows in my Black+Decker CM4200S Coffee Maker?
The filter basket might overflow if the carafe has been removed for longer than 30 seconds when using the Sneak-A-Cup™ feature; make sure to replace the carafe within 30 seconds during the brewing cycle. Also, an excessive amount of coffee could cause overflow; reduce the amount of coffee used.
Why is the CHECK WATER warning flashing on my Black+Decker CM4200S Coffee Maker?
The 'CHECK WATER' warning may flash because there's not enough water in the tank. Ensure the water in the reservoir is equal to or greater than the number of cups selected. Alternatively, the coffeemaker might need cleaning; in that case, follow the instructions in the 'Auto Clean' section.
Why is my Black+Decker CM4200S brewing less coffee than selected?
The brewed volume might be less than selected due to several reasons: 1. The coffeemaker may need cleaning, so follow the instructions in the 'Auto Clean' section. 2. There might not have been enough water in the tank; ensure the amount of water in the reservoir is equal to or greater than the number of cups selected. 3. An excessive amount of coffee was used; reduce the amount of coffee used.
Why is my Black+Decker CM4200S Coffee Maker leaking?
Your coffeemaker could be leaking due to a few reasons: * The water reservoir may be overfilled; make sure it hasn't been filled beyond the max line. * The carafe lid may not be closed; ensure the lid is closed securely on the carafe. * The carafe may not be correctly placed on the carafe plate; make sure the carafe is placed securely onto the carafe plate.
Why is there coffee sediment in my brewed cup from my Black+Decker Coffee Maker?
Coffee sediment in your brewed cup indicates that the paper filter and/or the filter basket were not properly placed. Insert a basket-shaped paper filter into the filter basket and insert the basket properly into the holder.
General| Brand | Black+Decker |
|---|---|
| Model | CM4200S |
| Category | Coffee Maker |
| Language | English |
Explains the polarized plug design to reduce electric shock risk.
Warns against removing the cover due to a tamper-resistant screw.
Discusses power supply cord safety and extension cord usage.
Steps for initial setup, including registration and cleaning.
Instructions for setting the digital clock on the coffeemaker.
Detailed steps for brewing coffee, including strength and keep warm options.
Explains how to pause brewing to get a cup before completion.
Instructions for setting a delayed brew time for coffee.
To Next Page