4
ENGLISH
(Original instructions)
4
ENGLISH
(Original instructions)
Intended use
Your Black + Decker multi-purpose tool has been designed for
a wide range of DIY applications.
Using the hammer drill head (MTHD186), this tool is intended
for screwdriving applications and for drilling in wood, metal,
plastics and soft masonry.
This tool is intended for consumer use only. Your Black +
Decker charger has been designed for charging Black +
Decker batteries of the type supplied with this tool.
Safety instructions
General power tool safety warnings
@
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
Multi Tool
EVO185
Voltage V 18V(20V Max)
Weight kg 0.54(No battery weight)
Hammer drill MTHD186
No-load speed /min
0-500/0-1600
Max. torque
Nm
46
Chuck capacity mm 10
Max Drilling capacity
Steel/Wood/Masonry mm 10/25/10
Weight kg 0.69
Charger
Input Voltage V 100-240
Output Voltage V 8-20
Current 400mA
Approx. charge time 4Hours
Battery BL1518
Voltage V 18V(20V Max)
Capacity Ah 1.5
Type Li-lon
EVO185
MULTI TOOL
Technical data
To Next Page
Loading...
