to control.
7. Use the power tool, accessories and tool bits in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a
hazardous situation.
Service
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
2. Power to the tool should always be supplied via residual current device with a rated residual current of 30mA or less.
Additional power tool safety warnings
Warning! Additional safety warnings for sanders
Warning! Contact with or inhalation of dusts arising from sanding applications may endanger the health of the operator and
possible by stand protection against dust and fumes and ensure that persons within or entering the work area are also protected.
Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may
contact hidden Accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the
operator an electric shock
Use clamps or another practical way to secure and support the work piece to a stable Holding the work by hand or
against your body leaves it unstable and may lead to loss of control.
Warning! Take special care when sanding some woods (e.g. beech, oak) and metal which may Product toxic dust. Wear a dust
mask specification cally designed for protection against toxic dust and fumes and ensure that persons within or entering the work
area are also protected.
Warning! Use this tool in a well ventilated area when sanding ferrous metals. Do not operate Sparks or hot particles from
sanding or arcing
motor brushes may ignite combustible materials.
Warning! Do not sand magnesium! There is a risk of fire or explosions.
Thoroughly remove all dust after sanding.
The intended use is described in this instruction manual.The use of any accessory or attachment or performance of any
operation with this tool other than those recommended in this instruction manual may present a risk of personal injury and/or
damage to property
Safety when sanding paint
Warning! Observe the applicable regulations for sanding paint. Pay special attention to the following:
Whenever possible, use a vacuum extractor for dust collection.
Take special care when sanding paint which is possibly lead based and may produce toxic dust:
Do not let children or pregnant women enter the work area.
All persons entering the work area should wear a mask specially designed for protection against lead paint dust and fumes.
Do not eat, drink or smoke in the work area.
Dispose of dust particles and any other removal debris safely.
Safety of others
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can
arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not
be avoided. These include:
To Next Page
Loading...
Need help?
General
