11
MAINTENANCE
WARNING: Release the bail
handle (2), remove the safety key (3)
before making any adjustments,
inspecting, services, changing of
accessories, cleaning the snow mover,
and the like. Any operation should be
performed only after the revolving parts
inside the snow mover have come to a
full stop.
IMPORTANT
and adjustment should be performed
by authorized
service centers or other qualified
service organizations, always using
replacement parts.
When servicing use ONLY IDENTICAL
REPLACEMENT PARTS.
LUBRICATION
The snow mover is lubricated during
assembly at the manufacturing facility.
mover is unnecessary and may cause
damage to the unit.
STORAGE
1. Remove the battery and safety key
from the snow mover.
2. Wipe off excess moisture on the snow
mover before storing or transporting.
Ensure the unit is fully secured when
transporting.
3. Inspect the snow mover carefully for
worn, loose, or damaged parts. Check
bolts and screws and tighten if needed.
out of the reach of children to prevent
unauthorized use.
The RBRC
®
Seal
The RBRC® (Rechargeable
Battery Recycling Corp oration)
nickel metal hydride or lithium-
ionbatteries (or battery packs) indicates
that the costs to recycle these batteries
(or battery packs) at the end of their
useful life have already been paid by
illegal to place spent nickel cadmium,
nickel metal hydride or lithium-ion
batteries in the trash or municipal solid
waste stream and the Call 2 Recycle®
program provides an environmentally
conscious alternative.
Call 2 Recycle, Inc., in cooperation with
users, has established the program in the
collection of spent nickel cadmium, nickel
guard too far downward as this can
the deflector and discharge chute
as
shown in Figure
17.
CLEARING BLOCKAGES
WARNING: Release the bail
handle (2), remove the safety key (3)
before making any adjustments,
inspecting, services, changing of
accessories, cleaning the snow mover,
and the like. Any operation should be
performed only after the revolving parts
inside the snow mover have come to a
full stop.
Heavy wet snow may accumulate on the
inside of the discharge chute or in the
auger housing. If discharge performance
drops or auger jams:
safety key (3) and remove the battery.
housing for clogs and jams.
stick on snow mover.
WARNING: DO NOT ATTEMPT
TO CLEAR JAMS OR CLOGS WITH
YOUR HANDS. If a part freezes while the
snow mover is in use, stop the snow
mover, remove the battery and safety
operating the snow mover.
ACCESSORIES
WARNING: The use of any
accessory not recommended for use with
this tool could be hazardous.
Recommended accessories for use with
your snow mover are available from your
service center. If you need assistance
regarding accessories, please call:
1-800-544-6986
17
28
28
To Next Page
Loading...