Black+Decker MTOS4 User Manual

10
ENGLISH
(Original instructions)
u Do not force the cutting blade into the
workpiece. Note that cutting sheet metal will
normally take more time than sawing thicker
wooden workpieces.
u When cutting metal spread a thin lm of oil
along the cutting line before cutting.
u When sanding new layers of paint before ap-
plying another layer, use extra ne grit.
u On very uneven surfaces, or when removing
layers of paint, start with a coarse grit. On
other surfaces, start with a medium grit. In
both cases, gradually change to a ne grit for a
smooth nish.
u Consult your retailer for more information on
available accessories.
Technical data
MTOS4
(14.4 V)
(H1)
MTOS4
(Max)
(H1)
No-load speed min
-1
16300 18500
Oscillating angle Degrees
2.8 2.8
Weight
kg 1.3 1.3
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 86.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 97.5 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting wood (a
h, CW
) 6.2 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting metal (a
h, CM
) 9.8 m/s
2
, uncertainty (K) 1.5 m/s
2
Sanding (a
h,
) 11.8 m/s
2
, uncertainty (K) 1.5 m/s
2
Guarantee
Black & Decker is condent of the quality of its
products and offers an outstanding guarantee. This
guarantee statement is in addition to and in no way
prejudices your statutory rights. The guarantee is
valid within the territories of the Member States of
the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:

Black+Decker MTOS4 Specifications

General

Brand	Black+Decker
Model	MTOS4
Category	Sander
Language	English