Black+Decker BEW200 User Manual

1
2
3
4
5
6
7
BEW200
Multi sander
English 4
Bahasa Indonesia 10

Black+Decker BEW200 Specifications

General

Power Source	Corded Electric
Power	6 Amp
Dust Collection	Yes
Weight	8.5 lbs
Dust Extraction	Yes
Cable Length	2 m
Opm	12000
No Load Speed	12000 OPM

Summary

Intended Use

Safety Instructions

General Power Tool Safety Warnings

Read all safety warnings, instructions, illustrations and specifications provided with this power tool.

Work Area Safety

Keep work area clean and well lit. Do not operate in explosive atmospheres.

Electrical Safety

Power tool plugs must match the outlet. Never modify the plug in any way.

Personal Safety

Power Tool Use and Care

Additional Safety Warnings

Features

Assembly

Removing Sanding Bases

Undo the locking screw (9) and pull the sanding base from the tool.

Attaching Random Orbit Sanding Base

Hold the tool and base upwards and press down until it clicks into place.

Sanding Base and Sheet Management

Fitting Sanding Sheets

Place the sanding sheet onto the base, aligning holes.

Detail Base Attachment and Features

Covers attaching the detail base, its tips, and finger attachment.

Tool Operation and Accessories

Using the Sander and Dust Management

Covers tool usage, switching on/off, and emptying the dust canister.

Accessory Information

Information on supplied and available accessories for the sander.

Hints for Optimum Use

Maintenance

Protecting the Environment

Batteries

Service Information

Technical Data