Black+Decker BEW200 - Hints for Optimum Use; Maintenance; Protecting the Environment

8
ENGLISH
Item Description Purpose
Largedetail sanding
base (4).
For medium to large areas.
Thelarge detail base can be
used to sand into corners
and to the edge of the
workpiece.
Random orbit sanding
base (3).
For largeareas. The
randomorbit base can be
used for curved surfaces
and when you need a high-
quality nish.
Detail nger (6). For small hard-to-reach
areas. The detail nger can
be used for light sanding
and for sanding into corners.
Hints for optimum use
u For user comfort, the tool can be operated with one or
two hands (g. L, M, N). Do not place your hands over the
ventilationslots.
u Do not exert too much pressure on the tool.
u Regularyl check the condition of the sanding sheet.
Replace when necessary.
u Always sand with the grain of the wood.
u When sanding new layers of paint before applying another
layer, use extra ne grit.
u On very uneven surfaces, or whenremoving layers of
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a ne
grit for a smooth nish.
u Consult your retailer for more information on available
accessories.
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKER accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u Regularyl clean the ventilationslots in your tool and
charger using a soft brush or dry cloth.
u Regularyl clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-basedcleaner.
u Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail·
able for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent en·
vironmentalpollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
BLACK+DECKER providesa facility for the collection and
recycling of BLACK+DECKER products once they have
reached the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER ofce at
the address indicated in this manual. Alternatively, a list of
authorised BLACK+DECKER repair agents and full details
of our after-sales service and contacts are available on the
Internet at: www.2helpU.com